Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Fox Chase?
Spring repair in Fox Chase typically costs $180 – $340 for a single spring. Because torsion and extension springs are almost always replaced as a matched pair, most homeowners here end up somewhere around $360 – $680 for the full set. The written estimate we give you after we look at the door sets the final price, and there’s no charge for that estimate.
Fox Chase is a neighborhood of single-family homes built from the 1920s through the 1970s, and a lot of those garages still run the original single torsion spring on doors that see daily use. That one spring carries the entire weight of a door that can run over 150 pounds, and when it lets go, the door doesn’t open. If that’s where you are right now, call (877) 651-7237 and we’ll get a technician out to look at it. Same-day service is available, and our technicians have up to 11 years of experience with spring work on the eight brands we carry parts for: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
Key Takeaways
- Typical single-spring replacement in Fox Chase: $180 – $340.
- Matched pair (the usual job): roughly $360 – $680, about double the single-spring range.
- Spring work on torsion systems carries real injury risk; it’s the one repair we strongly recommend leaving to a trained technician.
- Free estimates, upfront pricing, and same-day emergency service when a door is stuck open, broken overnight, or blocking a car.
Spring Replacement Cost Breakdown (2026)
Here’s how the numbers break down for a typical spring job in Fox Chase. These are estimated ranges for the 2026 market, not a fixed quote. Your written estimate is what counts.
| Line item | Typical estimated range |
|---|---|
| Single torsion spring replacement (one spring) | $180 – $340 |
| Matched pair of torsion springs (replaced together) | $360 – $680 |
| Single extension spring replacement | $180 – $340 |
| Cable repair (often done alongside spring work) | $130 – $250 |
| Roller replacement | $110 – $220 |
| Track realignment | $120 – $240 |
| Panel replacement (if a spring failure bent a section) | $250 – $500 |
| Opener repair (if the opener was strained by a failed spring) | $120 – $320 |
| Broader garage door repair, all-in | $150 – $600 |
| New door installation (if the door itself is past saving) | $700 – $2,200 |
What pushes a Fox Chase spring job toward the top of the range? A heavy wood door on an older garage strains the springs more, so thicker-gauge replacement springs cost more than the standard pair. If the failure also snapped a cable or bent a track, that’s a second line item on the estimate. And if the door is older or a heavier custom build, a technician may recommend replacing the pair rather than just the one spring that broke, since a tired spring next to a fresh one works unevenly.
The good news is the base job is predictable. A standard single-car or two-car door with a typical torsion setup in Fox Chase usually lands right in the middle of that $180 – $340 single-spring range. For a complete walk-through of what the repair involves, our garage door repair Fox Chase page covers the full picture, and the dedicated spring replacement page explains the pair-versus-single decision in detail.
What Affects Spring Replacement Pricing in Fox Chase
- Number of springs. A door with two torsion springs costs about twice a single-spring job, because both get replaced at once. That’s not an upsell; pairing them keeps the door balanced and prevents a second failure a few months down the road.
- Spring type and gauge. Standard torsion springs cost less than heavier-gauge springs sized for a thick or overbuilt door. Extension-spring garage doors price out in the same ballpark, but the hardware differs.
- Door weight and material. A solid wood door weighs far more than an insulated steel one, and springs are sized to the weight they lift. Heavier doors need stronger springs, which cost more.
- What else the failure took with it. A broken spring can snap a cable, bend a track, or strain the opener as the door slams down. Each of those adds a line item to the estimate, so a technician checks the cables, rollers, and opener before quoting.
- Access and ceiling height. A low-clearance garage, a cramped single-car bay, or a door with a tight wind-up needs more time on the job, and that shows up in the labor side of the estimate.
- Urgency. A door stuck open overnight matters more than one that failed with the car safely inside. Emergency service for a stuck-open door in Fox Chase is a standing part of what we do, and it’s priced on the estimate like any other job.
One local note: Fox Chase sits in a part of Philadelphia where a lot of garages were built to hold a single car and haven’t been touched since. Doors that old often have a spring that’s been turning for a long time, and the first time it fails it tends to take the cable or a roller with it. A technician who’s seen it before can tell from a quick look whether you’re in for the base spring job or a slightly bigger one. Brand-agnostic help matters here too. Whether the door and opener are Clopay, Amarr, or Wayne Dalton, the technician arriving already knows the system and has the right parts for it. If the opener’s involved, our work covers LiftMaster, Chamberlain, Genie, and Craftsman units as well.
How to Save on Spring Replacement
Springs are a safety-critical part, so the biggest savings come from doing the right job once instead of the cheap job twice. A few practical ways to keep the cost down:
- Get the estimate before anything is ordered. The estimate is free. Knowing the exact range means you can compare and decide without pressure, and the written quote is what you pay.
- Replace the pair, not just the broken one. It sounds like spending more, but replacing both springs at once means one visit and one labor charge instead of two. A tired second spring usually fails within months.
- Ask the technician to check the cables and rollers while they’re in there. Catching a fraying cable before it snaps, at $130 – $250, is cheaper than fixing a snapped cable plus a bent panel after the door drops.
- Don’t force the door. Running an opener on a door with a broken spring grinds the opener and can bend panels. Stopping there can save you an opener repair bill on top of the spring.
- Book the estimate early if the door feels off. A door that’s slow, heavy, or noisy is telling you the spring is on its way out. Getting it looked at while the door still works is cheaper than an emergency call with the door stuck open.
Free estimates are available: call (877) 651-7237 and we’ll set one up. If the door’s already failed, tell us when you call and we’ll treat it as the emergency it is.
Can Spring Replacement Cost More Than a New Door?
No. A spring job in Fox Chase stays well under the cost of a new door. Spring replacement runs $180 – $340 for one spring, or roughly double for a matched pair, while new door installation runs $700 – $2,200. Even a full afternoon’s work that includes springs, cables, and a track realignment lands far below replacement. The only time a new door makes sense is when the door itself is failing, not just the spring: a bent or rusted-through panel, a cracked section, or a door that’s outlived its hardware. A technician will tell you straight if that’s the case, and since we cover full installation as well as repair, one call covers it either way. Call (877) 651-7237 for a free estimate and a straight answer.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Fox Chase?
Spring replacement in Fox Chase typically costs $180 – $340 for a single spring, and about $360 – $680 for a matched pair, since both springs are usually replaced together. The written estimate sets the final price, and estimates are free. Call (877) 651-7237 for an exact quote on your door.
Why does a matched pair cost about twice a single spring?
A pair costs about twice the single-spring range because you’re buying two springs. Springs are sized to the door and paired to carry the load evenly, so replacing both at once keeps the door balanced. Doing it in one visit also means one labor charge instead of two. Call (877) 651-7237 to find out whether your door takes a single spring or a pair.
Can I replace a garage door spring myself?
We don’t recommend it. A torsion spring is under extreme tension even when it looks relaxed, and releasing it without the right tools and training can cause serious injury. It’s the highest-risk component on any garage door, which is why we treat spring repair as its own specialized service and why our technicians train specifically for it. Leave it to a trained technician, and call (877) 651-7237 if your door’s not opening.
Can you come out today when a spring breaks?
Yes. Spring repair is something we handle as emergency service, not an afterthought, and same-day service is available when a door is stuck open, broken overnight, or blocking a car. Response is fast, with dispatch from 7am to 7pm. If the door fails on a Saturday, call and we’ll book you for Sunday. Call (877) 651-7237 to get on the schedule.
Do you charge for the estimate, and will the quoted price change?
The estimate is free, and the written quote is the price you pay. The technician checks the springs, cables, rollers, tracks, and opener before quoting, so any add-on work shows up on the estimate upfront rather than as a surprise later. Estimates are free, so call (877) 651-7237 to set one up.
Why a Specialist Matters on Spring Work
Springs are the one part of a garage door where getting the job right the first time genuinely matters. A general handyman may avoid the work or outsource it, and that’s not a knock on handymen. It’s that a torsion spring needs to be matched to door weight, wound with the right tools, and balanced against the cable and track system. Getting it wrong shows up fast: a door that opens crooked, an opener that strains, or a spring that fails again. Our technicians do this work as a named service, and brand-agnostic expertise means they already know your door and opener system when they arrive, whether it’s a LiftMaster operator or a Genie opener on an Amarr door. No learning curve on the job.
Emergency spring failures, cables, rollers, openers, new doors: one call covers the whole lifecycle, so you’re not lining up a different contractor for each piece. For a door that needs more than a spring, our garage door repair team works the same way. The goal on any spring job in Fox Chase is simple: get the door working safely and get you back to your day.
Frequently Asked Questions About Spring Repair in Fox Chase
How long does a spring replacement take?
A standard single-spring replacement on a typical Fox Chase door usually takes a technician under an hour, and a matched pair runs a bit longer. Add time if the job includes a cable or track repair. Call (877) 651-7237 and we’ll tell you what to expect for your door.
What are the warning signs a spring is about to fail?
A door that suddenly feels heavy, opens halfway and stops, or makes a loud bang from the garage is telling you the spring is on its way out or already gone. A gap in the spring coil is a visible sign. If you notice any of these, it’s worth getting looked at before the door is stuck open. Call (877) 651-7237 for a free estimate.
Do you work on my opener brand?
We work on LiftMaster, Chamberlain, Genie, and Craftsman openers, and that includes the smart and WiFi-connected units, not just older chain-drive models. If your opener is straining under a broken spring, that’s part of the same visit. Call (877) 651-7237 and tell us what’s on your door.
How much does a full garage door repair cost in Fox Chase if the spring took other parts with it?
Broader garage door repair in Fox Chase typically runs $150 – $600, depending on what failed alongside the spring. A cable adds $130 – $250, a bent panel $250 – $500, and a strained opener $120 – $320. The written estimate lays it all out before work starts. Call (877) 651-7237 for a free estimate.
Pricing reflects the Fox Chase market as of 2026. Garage Door Repair Fox Chase offers free estimates – call (877) 651-7237.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Marcy Miller"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Eric Sullivan"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Tracy Delaney